WOMEN

Adhesive backing

Dimensions: 1.2" x 2"

How to Apply:

HEAT SEAL MACHINE:

1. Set the machine to 365 degrees.
2. Prior to placing the custom made patch on the garment, pre-heat the spot where the patch is to be placed for 15 seconds.
3. Place the embroidered patch on pre-heated spot and apply heat for 18 to 20 seconds using 50 to 70 pounds of pressure.
4. Allow item to cool for at least 5 hours for a permanent application.

HOUSEHOLD IRON:

1. Pre-heat iron to “cotton” setting. Please make sure the steam is “turned off”.
2. Place custom iron-on patch on garment and cover patch with a fine piece of cloth.
3. Press iron on patch for 25 seconds with constant, firm pressure. Do not use a “back and forth” motion as it will compromise the patch’s placement and heat seal’s ability to adhere.
4. Allow item to cool for at least 5 hours prior to using

Adhesive backing

Dimensions: 3" x 2.5"

How to Apply:

HEAT SEAL MACHINE:

1. Set the machine to 365 degrees.
2. Prior to placing the custom made patch on the garment, pre-heat the spot where the patch is to be placed for 15 seconds.
3. Place the embroidered patch on pre-heated spot and apply heat for 18 to 20 seconds using 50 to 70 pounds of pressure.
4. Allow item to cool for at least 5 hours for a permanent application.

HOUSEHOLD IRON:

1. Pre-heat iron to “cotton” setting. Please make sure the steam is “turned off”.
2. Place custom iron-on patch on garment and cover patch with a fine piece of cloth.
3. Press iron on patch for 25 seconds with constant, firm pressure. Do not use a “back and forth” motion as it will compromise the patch’s placement and heat seal’s ability to adhere.
4. Allow item to cool for at least 5 hours prior to using

Adhesive Backing

Dimensions- 3" x 2"

How to Apply:

HEAT SEAL MACHINE:

1. Set the machine to 365 degrees.
2. Prior to placing the custom made patch on the garment, pre-heat the spot where the patch is to be placed for 15 seconds.
3. Place the embroidered patch on pre-heated spot and apply heat for 18 to 20 seconds using 50 to 70 pounds of pressure.
4. Allow item to cool for at least 5 hours for a permanent application.

HOUSEHOLD IRON:

1. Pre-heat iron to “cotton” setting. Please make sure the steam is “turned off”.
2. Place custom iron-on patch on garment and cover patch with a fine piece of cloth.
3. Press iron on patch for 25 seconds with constant, firm pressure. Do not use a “back and forth” motion as it will compromise the patch’s placement and heat seal’s ability to adhere.
4. Allow item to cool for at least 5 hours prior to using

Adhesive Backing

Dimensions- 4" x 3.5"

How to Apply:

HEAT SEAL MACHINE:

1. Set the machine to 365 degrees.
2. Prior to placing the custom made patch on the garment, pre-heat the spot where the patch is to be placed for 15 seconds.
3. Place the embroidered patch on pre-heated spot and apply heat for 18 to 20 seconds using 50 to 70 pounds of pressure.
4. Allow item to cool for at least 5 hours for a permanent application.

HOUSEHOLD IRON:

1. Pre-heat iron to “cotton” setting. Please make sure the steam is “turned off”.
2. Place custom iron-on patch on garment and cover patch with a fine piece of cloth.
3. Press iron on patch for 25 seconds with constant, firm pressure. Do not use a “back and forth” motion as it will compromise the patch’s placement and heat seal’s ability to adhere.
4. Allow item to cool for at least 5 hours prior to using

Adhesive backing

Dimensions- 3.5" x 2.5"

How to Apply:

HEAT SEAL MACHINE:

1. Set the machine to 365 degrees.
2. Prior to placing the custom made patch on the garment, pre-heat the spot where the patch is to be placed for 15 seconds.
3. Place the embroidered patch on pre-heated spot and apply heat for 18 to 20 seconds using 50 to 70 pounds of pressure.
4. Allow item to cool for at least 5 hours for a permanent application.

HOUSEHOLD IRON:

1. Pre-heat iron to “cotton” setting. Please make sure the steam is “turned off”.
2. Place custom iron-on patch on garment and cover patch with a fine piece of cloth.
3. Press iron on patch for 25 seconds with constant, firm pressure. Do not use a “back and forth” motion as it will compromise the patch’s placement and heat seal’s ability to adhere.
4. Allow item to cool for at least 5 hours prior to using

Adhesive Patch

Swarovski Crystal 

Dimensions- 4" x 3.5"

How to Apply:

HEAT SEAL MACHINE:

1. Set the machine to 365 degrees.
2. Prior to placing the custom made patch on the garment, pre-heat the spot where the patch is to be placed for 15 seconds.
3. Place the embroidered patch on pre-heated spot and apply heat for 18 to 20 seconds using 50 to 70 pounds of pressure.
4. Allow item to cool for at least 5 hours for a permanent application.

HOUSEHOLD IRON:

1. Pre-heat iron to “cotton” setting. Please make sure the steam is “turned off”.
2. Place custom iron-on patch on garment and cover patch with a fine piece of cloth.
3. Press iron on patch for 25 seconds with constant, firm pressure. Do not use a “back and forth” motion as it will compromise the patch’s placement and heat seal’s ability to adhere.
4. Allow item to cool for at least 5 hours prior to using

Adhesive Patch

Swarovski Crystal 

Dimensions -4" x 2.5"

How to Apply:

HEAT SEAL MACHINE:

1. Set the machine to 365 degrees.
2. Prior to placing the custom made patch on the garment, pre-heat the spot where the patch is to be placed for 15 seconds.
3. Place the embroidered patch on pre-heated spot and apply heat for 18 to 20 seconds using 50 to 70 pounds of pressure.
4. Allow item to cool for at least 5 hours for a permanent application.

HOUSEHOLD IRON:

1. Pre-heat iron to “cotton” setting. Please make sure the steam is “turned off”.
2. Place custom iron-on patch on garment and cover patch with a fine piece of cloth.
3. Press iron on patch for 25 seconds with constant, firm pressure. Do not use a “back and forth” motion as it will compromise the patch’s placement and heat seal’s ability to adhere.
4. Allow item to cool for at least 5 hours prior to using

Adhesive Patch

Swarovski Crystal 

Dimensions- 4" x 4"

How to Apply: 

HEAT SEAL MACHINE:

1. Set the machine to 365 degrees.
2. Prior to placing the custom made patch on the garment, pre-heat the spot where the patch is to be placed for 15 seconds.
3. Place the embroidered patch on pre-heated spot and apply heat for 18 to 20 seconds using 50 to 70 pounds of pressure.
4. Allow item to cool for at least 5 hours for a permanent application.

HOUSEHOLD IRON:

1. Pre-heat iron to “cotton” setting. Please make sure the steam is “turned off”.
2. Place custom iron-on patch on garment and cover patch with a fine piece of cloth.
3. Press iron on patch for 25 seconds with constant, firm pressure. Do not use a “back and forth” motion as it will compromise the patch’s placement and heat seal’s ability to adhere.
4. Allow item to cool for at least 5 hours prior to using

Adhesive Backing

Montana blue Swarovski Crystals

Dimensions- 3.5" x 3"

How to Apply:

HEAT SEAL MACHINE:

1. Set the machine to 365 degrees.
2. Prior to placing the custom made patch on the garment, pre-heat the spot where the patch is to be placed for 15 seconds.
3. Place the embroidered patch on pre-heated spot and apply heat for 18 to 20 seconds using 50 to 70 pounds of pressure.
4. Allow item to cool for at least 5 hours for a permanent application.

HOUSEHOLD IRON:

1. Pre-heat iron to “cotton” setting. Please make sure the steam is “turned off”.
2. Place custom iron-on patch on garment and cover patch with a fine piece of cloth.
3. Press iron on patch for 25 seconds with constant, firm pressure. Do not use a “back and forth” motion as it will compromise the patch’s placement and heat seal’s ability to adhere.
4. Allow item to cool for at least 5 hours prior to using