Holiday Gift Guide

$95 Value

Set Includes:

Stainless Steel Note Necklace

Blue Note Canvas Cosmetic Bag

Blue Note Poly-Satin Scarf

From now until December 25 buy a Jean jacket get 50% off any patch!! 

• Loose Fit: Oversized cut. Designed with little to no structure in shoulders, chest and waist.
• Material: 100% Nylon – Body; 100% Polyester – Lining and Filling
• Reversible-- Inside is all light grey with no St.Louis Blues Note, only UA symbol
• Two front pockets with snap closures
• Midweight vest suitable moderate temperatures
• Sleeveless
• Two side slip pockets
• Embroidered graphics
• Vertical pocket with hidden zipper
• Olympic collar
• Machine wash with garment inside out, tumble dry low
• Tagless Collar
• Officially licensed
• Imported

• Loose Fit: Oversized cut. Designed with little to no structure in shoulders, chest and waist.
• Material: 72% Cotton/21% Polyester/7% Elastane – Body; 60% Cotton/40% Polyester – Sleeve Panels
• Lightweight jacket suitable for mild temperatures
• Olympic collar
• 1/4 Zip
• Thumbhole in cuffs
• Rounded hem
• Contrast-color insets
• Woven brand tag at bottom left hem
• Screen print graphics
• Long sleeve
• Machine wash with garment inside out, tumble dry low
• Tagless Collar
• Officially licensed
• Imported

Adhesive Backing

Dimensions- 3" x 2"

How to Apply:

HEAT SEAL MACHINE:

1. Set the machine to 365 degrees.
2. Prior to placing the custom made patch on the garment, pre-heat the spot where the patch is to be placed for 15 seconds.
3. Place the embroidered patch on pre-heated spot and apply heat for 18 to 20 seconds using 50 to 70 pounds of pressure.
4. Allow item to cool for at least 5 hours for a permanent application.

HOUSEHOLD IRON:

1. Pre-heat iron to “cotton” setting. Please make sure the steam is “turned off”.
2. Place custom iron-on patch on garment and cover patch with a fine piece of cloth.
3. Press iron on patch for 25 seconds with constant, firm pressure. Do not use a “back and forth” motion as it will compromise the patch’s placement and heat seal’s ability to adhere.
4. Allow item to cool for at least 5 hours prior to using

Adhesive Backing

Dimensions- 4" x 3.5"

How to Apply:

HEAT SEAL MACHINE:

1. Set the machine to 365 degrees.
2. Prior to placing the custom made patch on the garment, pre-heat the spot where the patch is to be placed for 15 seconds.
3. Place the embroidered patch on pre-heated spot and apply heat for 18 to 20 seconds using 50 to 70 pounds of pressure.
4. Allow item to cool for at least 5 hours for a permanent application.

HOUSEHOLD IRON:

1. Pre-heat iron to “cotton” setting. Please make sure the steam is “turned off”.
2. Place custom iron-on patch on garment and cover patch with a fine piece of cloth.
3. Press iron on patch for 25 seconds with constant, firm pressure. Do not use a “back and forth” motion as it will compromise the patch’s placement and heat seal’s ability to adhere.
4. Allow item to cool for at least 5 hours prior to using

Adhesive backing

Dimensions- 3.5" x 2.5"

How to Apply:

HEAT SEAL MACHINE:

1. Set the machine to 365 degrees.
2. Prior to placing the custom made patch on the garment, pre-heat the spot where the patch is to be placed for 15 seconds.
3. Place the embroidered patch on pre-heated spot and apply heat for 18 to 20 seconds using 50 to 70 pounds of pressure.
4. Allow item to cool for at least 5 hours for a permanent application.

HOUSEHOLD IRON:

1. Pre-heat iron to “cotton” setting. Please make sure the steam is “turned off”.
2. Place custom iron-on patch on garment and cover patch with a fine piece of cloth.
3. Press iron on patch for 25 seconds with constant, firm pressure. Do not use a “back and forth” motion as it will compromise the patch’s placement and heat seal’s ability to adhere.
4. Allow item to cool for at least 5 hours prior to using

Adhesive Patch

Swarovski Crystal 

Dimensions- 4" x 3.5"

How to Apply:

HEAT SEAL MACHINE:

1. Set the machine to 365 degrees.
2. Prior to placing the custom made patch on the garment, pre-heat the spot where the patch is to be placed for 15 seconds.
3. Place the embroidered patch on pre-heated spot and apply heat for 18 to 20 seconds using 50 to 70 pounds of pressure.
4. Allow item to cool for at least 5 hours for a permanent application.

HOUSEHOLD IRON:

1. Pre-heat iron to “cotton” setting. Please make sure the steam is “turned off”.
2. Place custom iron-on patch on garment and cover patch with a fine piece of cloth.
3. Press iron on patch for 25 seconds with constant, firm pressure. Do not use a “back and forth” motion as it will compromise the patch’s placement and heat seal’s ability to adhere.
4. Allow item to cool for at least 5 hours prior to using

Adhesive Patch

Swarovski Crystal 

Dimensions -4" x 2.5"

How to Apply:

HEAT SEAL MACHINE:

1. Set the machine to 365 degrees.
2. Prior to placing the custom made patch on the garment, pre-heat the spot where the patch is to be placed for 15 seconds.
3. Place the embroidered patch on pre-heated spot and apply heat for 18 to 20 seconds using 50 to 70 pounds of pressure.
4. Allow item to cool for at least 5 hours for a permanent application.

HOUSEHOLD IRON:

1. Pre-heat iron to “cotton” setting. Please make sure the steam is “turned off”.
2. Place custom iron-on patch on garment and cover patch with a fine piece of cloth.
3. Press iron on patch for 25 seconds with constant, firm pressure. Do not use a “back and forth” motion as it will compromise the patch’s placement and heat seal’s ability to adhere.
4. Allow item to cool for at least 5 hours prior to using

Adhesive Patch

Swarovski Crystal 

Dimensions- 4" x 4"

How to Apply: 

HEAT SEAL MACHINE:

1. Set the machine to 365 degrees.
2. Prior to placing the custom made patch on the garment, pre-heat the spot where the patch is to be placed for 15 seconds.
3. Place the embroidered patch on pre-heated spot and apply heat for 18 to 20 seconds using 50 to 70 pounds of pressure.
4. Allow item to cool for at least 5 hours for a permanent application.

HOUSEHOLD IRON:

1. Pre-heat iron to “cotton” setting. Please make sure the steam is “turned off”.
2. Place custom iron-on patch on garment and cover patch with a fine piece of cloth.
3. Press iron on patch for 25 seconds with constant, firm pressure. Do not use a “back and forth” motion as it will compromise the patch’s placement and heat seal’s ability to adhere.
4. Allow item to cool for at least 5 hours prior to using

Adhesive Backing

Montana blue Swarovski Crystals

Dimensions- 3.5" x 3"

How to Apply:

HEAT SEAL MACHINE:

1. Set the machine to 365 degrees.
2. Prior to placing the custom made patch on the garment, pre-heat the spot where the patch is to be placed for 15 seconds.
3. Place the embroidered patch on pre-heated spot and apply heat for 18 to 20 seconds using 50 to 70 pounds of pressure.
4. Allow item to cool for at least 5 hours for a permanent application.

HOUSEHOLD IRON:

1. Pre-heat iron to “cotton” setting. Please make sure the steam is “turned off”.
2. Place custom iron-on patch on garment and cover patch with a fine piece of cloth.
3. Press iron on patch for 25 seconds with constant, firm pressure. Do not use a “back and forth” motion as it will compromise the patch’s placement and heat seal’s ability to adhere.
4. Allow item to cool for at least 5 hours prior to using

This 100% cotton women's sweater was not just made in the USA, but designed and manufactured right here in St Louis at one of the most technologically advanced knitting factories in the world. It’s off white color yarns and retro stripes harken back to vintage sweaters of the 1970s and Blues official jerseys of the 1990s.  This sweater is an easy fit but not too oversized.

SHIPS DECEMBER 18*

85% Cotton / 15% Poly

French Terry 

270gsm

Sueded 

Thumbholes

Softner Wash

Raw Edges 

Soft-hand Plastisol Print

Officially Licensed St. Louis Blues Clean Up hat

Light gray hat made from 100% cotton

Royal Blue Note raised embroidered logo and white, gold, and black detailing

Rocks are in blue tonal Swarovski Crystal 

Adjustable strap back with brass buckle

• Ladies' cotton jean jacket
• Embroidered felt wordmarks and logo on back
• Designed and embroidered in St. Louis, MO
• Officially licensed

** One Jacket Per Design- Size and Price Vary Depending on Design Style. 

Gold plate necklace with Bluenote

Royal blue hair band and bracelet with gold plate Bluenote charm

This 100% cotton sweater scarf was not just made in the USA, but designed and manufactured right here in St Louis at one of the most technologically advanced knitting factories in the world. This 70” striped scarf is a mix of current and retro Blues team colors and a perfect fit for any Blues fan!

Gold Dangle

85% Cotton / 15% Poly

French Terry 

270gsm

Sueded 

Thumbholes

Softner Wash

Raw Edges 

Soft-hand Plastisol Print